The Digital Transformation of Battery Manufacturing
Show notes
The battery industry is both unique and will depend on many of the innovations from other industries to hit key targets. Namely, digital transformation will play a critical role in helping suppliers, manufacturers, and OEMs accelerate production sustainably and meet the expected market demand for batteries. For episode five of the Battery Podcast, I sit down with our resident host and battery expert Puneet Sinha (Senior Director of Battery Industry at Siemens Digital Industries Software) and our guest Magnus Edholm, who drives the Digital Enterprise at Siemens.
In the first half of our lengthy discussion, we cover the push for acceleration in the battery industry, where demand is expected to increase 14-fold by 2030 from what was needed only a few years ago. And before taking a break for part two, we also take time to cover the scale of what these expectations mean for a manufacturing environment. Gigafactories are huge facilities, but businesses need the same level of understanding or better to harness their potential over smaller facilities.
What you’ll learn:
[1:47] Why is Siemens focused on battery right now?
[4:03] What do manufacturers need to be successful?
[10:30] How are companies expected to scale to the market demand for batteries?
[18:19] What are companies doing to optimize their IT/OT processes for the floor?
Transcript
Welcome back to the Battery podcast from Siemens Digital-Industries where we talk about all things battery with industry leaders, key partners, and Siemens experts. I'm Nick Finberg and I'll be your moderator for the podcast. Today's episode will focus on digital transformation of industry, specifically battery, as they are forced to accelerate to keep up the pace of changing demands. Uh, to discuss this, we have a resident host, Puneet Sinha, and our guest today, Magnus Edholm, head of marketing for Siemens Digital Enterprise. Um, welcome to the battery podcast, Magnus. Would you please introduce yourself for those that may not recognize you? Absolute, thank you very much first of all for having me, Nick. It's a pleasure to talk to you and of course also to Punit. Uh, a few words about me, myself. I've been in the field of digitalization for, I guess. The better part of 25 years, and of those 25 years, I probably spent 12 to 15 driving in the digital enterprise within Siemens. Uh, I started off as an application engineer, I've been working as a consultant on various, um, different companies around the globe, um, mainly in the field of manufacturing, to be honest. So simulation, manufacturing, planning, and so on and so forth. And then I moved into marketing. Probably like 15 years ago, um, using what I learned over the years. Thanks for joining us, Magnus, and for the audience that may not recognize Punit, he is our global head of battery industry in Siemens software with over 15 years in the battery field in research at GM and in business development, helping a startup democratize battery development and engineering. So every year we use a technology or industry to showcase our solutions across design. Manufacturing and logistics at our large uh show events. Um, and Magnus, this year you, you presented on battery. Why did you want to talk about batteries this year? Exactly, that's how we do. We at our big trade shows and events, we always try to focus on things that are interesting for the world. And if we look at the sustainability that kind of drives the industry forward, probably the most important part of what we do today is to drive sustainability in everything we do. And obviously this is reflected also in the field of manufacturing and With sustainability being so important, this also obviously affects, for example, uh, transportation. I mean you have battery applications for cars, you have it for industry, you've got it for storage and even handheld tools. So what we did was we drilled down all the use of batteries in electrical cars this year, um, because I think it's important to know that um From 2018 to 2030, the demand for batteries will increase with a factor of 1414. That is a huge increase. This means that we as manufacturing companies out there need to be able to develop batteries quick with high quality, and of course also sustainably. And therefore I think it's extremely important. And those batteries need to be developed or produced in machines. And so machine building, I mean, everything comes together, and we've found it been extremely important and interesting to dig down in the field of batteries and show how we as Siemens can. Support the industry with the software required to design and develop the best batteries, sustainable, high quality batteries, but also the machines being able to meet the demand of this factor of 14. It's huge. Just keep that in mind, it's huge. And that's what we did. And um we also took the whole scope, took a holistic approach. We've gone upstream looking at what material we're using. We're looking at the sustainability, I'm sure we're going to talk about that in the next few minutes, but that was our approach, showing how we as Siemens, with our software and hardware and services know-how can support the industry delivering this increased amount of batteries. Uh, so, given some of the challenges ahead, uh, what do battery manufacturers need to be successful? Um, is digitalization an important step for these customers? I, I would say it is crucial for the manufacturers. Um, if we look at the traditional way of creating or developing. Batteries. Um, it's usually been done on physical batteries if you like, working with the acids and the metals. So it's been kind of a time consuming and resource intense development methodology. With the digitalization solutions, and I'm kind of thinking mainly about the software simulation tools that we have, you are actually able to develop the batteries, simulate the chemistry, uh, develop the battery in parallel with the battery management system because you need the battery management system in there. Everything you do with digital will save. You time. And I believe that digitalization solutions, the software simulation stuff that we have enables you to increase the amount of iterations. You do a test, you simulate it, you see the result. You learn from that. If you didn't hit the spot, then you do it again. I think that it's extremely important and this is not something new. I mean, Battery is an industry that's important, but the same approach we can also take, be it in the uh electronics industry, be it in pharmaceutical, be it in aerospace. Using digitalization solutions are key for this. Perhaps U Pit want to step in here and add some thoughts to it also. Absolutely, Magnus. First of all, I had a pleasure to be with Magnus at the event he was referring to earlier this year. Everything that Magnus mentioned of the need of battery demand that is growing with various applications, be it transport, energy storage is real. When we were at this event together, we saw tremendous demand for digital transformation and digitalization of battery industry. To add to what Magnus said. If you can take a step back and look at battery and the underlying physics, underlying process to engineer or manufacture a battery is fundamentally different from the kind of process. Industry is used to, uh, while developing IC engines or IC vehicles. To put it more specifically, For batteries, there is a strong interaction between different domains like chemistry, mechanical, thermal software, electrical, and electronics. This cross-domain interaction while developing battery. Or manufacturing a battery was not present or at best very weak for IC engines or other technologies. When we look at the battery, fundamentally, it is very critical that companies change the way they are going about engineering and manufacturing them. Hence, the need for the digital transformation is there. So that companies can evaluate different aspects, trade-offs. Uh, across different domains and how they're going to develop these batteries more effectively. If you look at the manufacturing, There are some fundamental aspects and the things that Magnus is highlighting. If I can add a little bit to what he said, if you think of battery manufacturing, actually, it is very interesting. The analogy between battery manufacturing and cake baking, as I said, battery manufacturing and cake baking. The process of how you bake a cake from mixing a goo or ink, spreading it on a flat surface, and then going through the process, um, and at the end you're taking a cake and putting it in an oven to bake. The processes for cell manufacturing are exactly the same. Interestingly, As you can imagine, if you give the same recipe of cake baking to an experienced cake baker, an amateur like me. You can be very sure that the quality. Of a cake that will come from an experienced uh baker versus me is going to be significantly different, although the recipe is the same. It is the same thing we are seeing in the battery industry too that although many companies may have the same. Recipeent or manufacturing processes. Experience today continues to be a big success factor in ensuring the quality of battery manufacturing. And that is something that needs to change for battery industry to grow at a speed it needs to grow to meet this ambition. This is where data-driven development is critically essential so that battery development, Does not always remain pivoted on experience so that companies leveraging the data coming out from the machines and factories can improve their manufacturing process. What we are seeing in our interaction with the battery industry across the world that there are a couple of key challenges. That are that are. Getting highlighted more and more often. One of them is very high scrap rate. We are seeing that a lot of companies when they're starting. There is large scale production. Their scrap rate is 40% or a little bit higher, and even then they get to a more stable running factories, they're still dealing with scrap rate of around 15%, which is too high. Um, to get to a cost effective large scale manufacturing. These kind of challenges need to be addressed in a very fast way, given the rapid demand increase for batteries. For their data-driven process, how digitalization can help in understanding the key limitations is very critical. You mentioned high scrap rate is one of the challenges, um, but I'm sure there's, there's a lot more to really scaling manufacturing capacity the 14 times that you need to to the expected demand. What is, what is that going to look like? Well, first of all, Nick, if I can take this one, if we start looking at those gigafactories, I'm sure you've seen them. I mean, those things are huge, like really massive, uh, for our European audience, I mean, if you take A Couple of them Eiffel Towers and just kind of put them on the side. I'm I'm sure you can probably fit like 78 of those Eiffel Towers in a Gigafactory for American audience. The Pentagon in Washington DC. Also there you can probably squeeze in some 5 Pentagons in a Gigafactory. That gives you a feeling. And for those into sports, I mean also here you're going to stop soon, but I mean there's got to be quite a few football fields in a Gigafactory. So it's big. And if you look at it, um, how many machines can be in there, or how many machines do you need in there, that is posing a challenge, definitely. And uh one more number, by the way, I forgot this one, like 1 giga hour capacity takes about 10,000 square meters. And now Nick, you do that into square feet, please, if you can. That's what, a little over 100,000 square feet. But in other words, it can take years to get those facilities up the line because Punit spoke about data and in a gigafactory have machines that are talking to each other. They are exchanging information and we, as let's say, leading or driving a gigafactor, those driving a gigafactor, they need to collect that data that's been generated. They need to analyze it, understand that data. And then use that data and feed it back into the system to continuously optimize everything that is being done. So it's a big thing. Uh, but there are opportunities in here, one being to work with our digitalization solution and perhaps virtually commissioning, and virally commission machines and lines. So we are essentially simulating the way the machines are working. When we have the stimulation, we can use a PLC code, a programmable logical controller, data that controls the machine. We use a virtual controller and basically, well, start that machine off in a digital environment to make sure it works the way we planned it. So that is also a way to test those what if scenarios. Again, coming back to the iteration. Meaning that when you are about to go live and to ramp up the factory, you can be sure that your machines, your lines, and perhaps even your entire factory will work exactly as you have done in um in your digital environment. And I believe that you can reduce the, the real commissioning time with up to 95% if you've done a proper virtual commissioning of the machines and lines. And there you can obviously save a lot of time to get it up there. Um. And another thing, um, coming back to data, I'm sure the, the, the convergence of IT and OT is something that you've been talking about, uh, basically connecting the top floor with the shop floor if you like, making sure that data flows from, let's say the ordering. Down to the machines, so you are on track of what's happening on your machines. You can follow the batches, you can be sure that you're producing quality product. Everything comes in to, to add to the value of a, of a factory, a giga factory and get it up and running. And also here I believe that automation in combination with simulation tools is also an enabler. Um, I mean there's no secret that uh one of the biggest challenges ahead. Is the lack of people working. I mean, demographic change, at least in Europe, is pretty obvious and hands on, and I believe working together with automation and people with the right skill set will be the enabler and perhaps also What drives the success in all of this, and, and I assume this is the same more or less globally. Um, so I think the, the, the having the convergence of people and automation is also utmost importance to reach to success. Uh, and also here I'm sure Pune, you being a specialist on the topic, anything you'd like to add on the field of IT and OT? Magnus, you have already touched on some very excellent points. When we look at the giga factories, some of the big challenge you talked about time it takes to scale up factories, factory throughput, costs, scrap rate. And if you look at these challenges, one reason Behind these challenges is how the traditional ways of manufacturing work wherein the different tool sets are kept separate. IT system and OD systems don't necessarily interact with each other, whereas they need to if you are looking to address the challenges Magnus you talked about. And yes, ITOT integration is becoming a big need for companies to address it, be it the new players or existing incumbent players who have been doing manufacturing for many years. They are looking to improve the efficiency of the production. So what does it mean to have IT OT integration? I want to spend perhaps a couple of minutes on this with our audience. ITOT integration allow companies to connect their shop floor with the rest of enterprise, and one concrete example of that is how companies can leverage the data coming out of a factory. As Magdas mentioned, in a gigafactory, there are many equipments. A lot of machines and there's a lot of data that is generated when the, when these machines are operational. Many of our interactions have shown that perhaps 80% of the data coming from a factory is not necessarily utilized. I repeat again. 80% of the data. And if companies are looking to solve the problems we just mentioned, they need to do so. And key enabler for that is ITOT integration. As Magnus was mentioning how some of the OT layers such as PLCs, uh, drives, and, uh, other hardwares in the factory. Need to connect more effectively with MES systems, cloud, and apps. If you can connect that, it can enable companies to make smart decisions that can help them scaling up their production, um. And reduce the scrap rate faster, very importantly. ITOT integration also allow companies to enforce the best manufacturing practices. This includes, but not limited to how operators can do more tasks, how material. That which is needed at certain machines can be provided to them in a timely manner and how predictive maintenance of various machines can be scheduled in a timely fashion. All of these issues. Come together in making sure that overall throughput of a production process is maximized. This makes sure that the production cost goes down and margin becomes better. So in a sense, ITOT integration is a big part of what is needed. In the industry to scale up manufacturing in gigafactories and meet their ambitions. ITOT sounds like a very important topic for optimizing not just your shop floor but your entire enterprise, but for battery manufacturing, um, that sounds like a really complex process. How are companies optimizing these processes to improve manufacturing efficiency? How are they dealing with an increased need for flexibility on top of the greater throughput? Um, I'm, I'm going to go back, Nick, to what I said before, the, the use of data. Um, again, all machines are more or less connected with each other and a huge amount of data is being generated. And I think it's important that you take this big data and you turn into smart data. You need to know what you're going to look at. And for here you have new technologies coming into play, probably artificial intelligence to recognize patterns, etc. Uh, but essentially, uh, the important part is to, uh, if you want to improve something, you need to measure it first. If you don't know where you're at, it's going to be terribly difficult to Improve your performance. Uh, and therefore we need again collect the data, understand data and use the data because that will Give us the insights we need to improve the throughput. Again, what Punit spoke about the ITOT having this transparency, which is crucial to know that what you're doing is being done in the absolutely right way and this through the entire life cycle of the battery in this case, but it's obviously applies also to other products. So in the design phase, the realization and the optimization phase. Um, and, um, in our, what you've mentioned at the beginning, the trade show this year, Hanover, it was, we started off, um, uh, we basically took, um, a complete, uh, holistic approach to the battery production, as I said. And you also mentioned, um, three different areas. I mean we can start with, um, The mixing process being able to simulate how this slurry comes together without having the physical mixing device or working with the physical. Chemistry that you put in there, the different materials, we're able to simulate and optimize this mixing device. It's almost like every morning, Nick, when you do your breakfast, you make a smoothie, I guess, bananas, some berries, and what have you. Same type of approach, but you measure the outcome, you can simulate exactly how this slurry is going to work when it's been then put on this, um, Film or the foil that's actually being used to create the batteries. So taking it from the mixing, we go into a slitting machine, which essentially takes this, um, uh, foil on which we have the slurry. We cut the, the slide, the foil in the exact width we need on a very cool machine called the slitting machine. It's big, it's heavy, and it's exactly, very, very exact in the way it cuts it. And then we take that information and perhaps move it on to let's say the assembly of the batteries. And also here I mean there's a huge optimization potential in all of this. The mixing can be optimized, the slitting can be optimized, and also the assembly. And a great example is that we had this robot assembling the battery packs. And the battery pack weighs somewhere around 38 to 42 kg, which is pretty heavy. I mean you need to have a very sturdy gripper. That gripper was made in aluminum, aluminum, as you say in the US, and we were able to work our magic on this part using generative design and topology optimization, creating something that's very organic. The cool thing is we walked away from the use of aluminum. Used a CO2 neutral polymer material and we reduced the weight with 80%, enabling us to work with a smaller robot because the weight of the gripper had gone down so much that this gripper, even though it's light, was capable of lifting those fairly heavy battery packs. So, There's so many areas that you can optimize and improve and get more effective and flexible in a battery pack. I could probably talk for hours on this and Punit would fall asleep, but I'm going to hand over to Pune because you were also an essential part of the battery showcase, right, Pune? Absolutely. Magnus has already mentioned some of the key elements. …