#125 Leveraging the Digital Twin through the Operation Phase

Buildings of Tomorrow ·

Show notes

In this episode, Kevin Bauer, lead for BIM and Digital Twin at Siemens Smart Infrastructure joins Jon Lester to explain how the digital twin can be leveraged throughout the operation phase, check it out!

Transcript

Hello and welcome to Buildings of Tomorrow. My name is John Lester, and in today's episode we are talking about leveraging the Building twin throughout the operations phase. I'm joined today by Kevin Bauer. He's the lead for BIMM and Digital twin at Siemens Smart-Infrastructure in Europe. Kevin, thank you so much for joining us. Hi John, I'm really happy to be here today again. It's an absolute pleasure to have you here. We've had a couple of discussions already around the digital twin and, and some of the experience that you and your team have had of really building and creating this digital twin throughout the delivery phase, bringing in additional detail that then enables you to start to leverage this building twin for more value through that operation phase, and And that's where we'd like to focus on a little bit today, that operation phase. So after we've gone through the BIM planning process, that collaborative process, and you know we've mentioned in the last couple of recordings, but you're also a certified trainer with Building Smart International. So you know that BIM, that structured process and the collaboration around the BIM process is something that you know extremely well and that you're passionate about. So going through that process, then through that entire delivery phase, and we get to the operational phase, here is where some of those, those benefits that we've talked a little bit about for the owner, the operator, the responsible for the building in that operation phase can really start to find additional value above and beyond what we would normally see in just the delivery phase. Um, let's start there a little bit on some of those values. Can you give us a little bit of an overview about some of the values that a digital twin can bring in that operation phase? Yeah, I think, you know, that we have a lot of values, a digital twin can bring and, um, there are different stakeholders to which we can address. In general, I think there are three main areas of failures we deliver. The first one is the technical operations where we can really help the facility manager, um, operating the building more efficient by combining the operational data. For example, we get alarms and combine these alarms also with the BI model to tell them exactly where it is. The second area of where we can deliver a lot of value is making buildings more energy efficient by combining again, the operation data with data from the BIM model, identifying which homes should have which energy, energy usage to do, for example, gap analytics and really identify We are some, we have some rooms which are not operating perfectly. And the third part is then, um, helping the end users, for example, staff in hospitals being more efficient by, let's say, asset tracking, helping them finding assets or colleagues more efficiently. All right, perfect. Uh, I'd love to dive into each one of those categories one by one because what, what I think is really interesting about the conversations we've had up until now is that some of these things you, you've actually done, and it's not theory, it's, it's something that you've, you've realized, you've gone through the process, and we see it working. So I'm interested to To get a little bit of detail into those three phases, the support and value for the technical operations of a building, the energy efficiency and sustainability, and then finally the productivity of the of the users of that building. So let's dive into the first one. Can you give us a little bit more detail around some of the things, some of the use cases, some of the values that Buil Twin can bring for a technical operations manager or a facility manager, someone who's keeping that building running up and up and going every day? Of course, yeah. Um, I think at first I would like to talk a little bit about the problems. What we have today, you know, we had a lot of, uh, customer discussions where, let's say, for me, it was really important as we started to pitch to digital twin concept, asked them the first thing is, um, what problems do you want to solve? Yeah? Because at the end, it's, let's say we don't want to just create products or solutions. At the end, for me, it's really important to solve problems and make the world a little bit better and help our customers. There we identified, especially in big hospitals, or let's say, in big, um, uh, industry complexes like hospitals, data centers, pharma, and industry complexes, which are really, really bigger, that the technical operations, is often really inefficient. Because the people, they just, you can say they don't know what's actually where in the building, yeah, because the buildings are often 2030 years old. And, uh, sometimes I'd say there is an alarm popping up from the building management station, saying the, uh, the, the sensor with the ID XYZ 231 is broken, and they just roughly know where. These issues. And then Let's say what's the, the, the today's process and how to solve it. It's like these are, they see it as a problem, and then they, Uh, wander a little bit around there. So they, let's say they don't make it really efficient because, you know, they also don't exactly know where the problem is. And therefore they go searching where it is called, so they just know this could roughly be on the 2nd floor, and then they go somewhere on the 2nd floor searching for it, and then they see, ah, there is the product which is broken, then they go back, look up, is this on stock or not on stock, and then they go back in again back there and it's say, It goes like this, yes, so we identified. Um, the process, how to solve the problem, so they, they have a lot of waste in it. And, um, the really important part which is missing is really giving them the experience exactly where is the thing, yeah. So combining, let's say, the alarm management with a 3D model, helping them, let's say there's an alarm, and then they can jump into the 3D model and see, ah, this is in a surgery room. This is in the hospital in the surgery room, so the, the, it's really important, the priority, and then they can look up is this on stock, stock, and then let's say if they have it on stock and they need to solve it really uh quickly, then they exactly also know where this is and how do they get there. Yeah, I understand. And And I can imagine, you know, the example you used. There's a hospital, but there'd be many different types of buildings that have this similar situation that are large facilities. They have multiple different applications spread across different places, any campus, universities, airports, hospitals, where not only is there too much to know the detail around everything like you describe, you have a rough idea of maybe which building or which floor or which wing something is in. But then also not knowing. What's there, what the application is, is this a space where you can enter easily? Is it a space where you need to wait or block it to make sure it's not being used to do maintenance, etc. etc. That level of information is often not available today, if I understand correctly. Exactly, this, they just, they, they just missed this information and then let's say the, the ports are really inefficient. Probably another example, going away from hospitals more into pharma industry. They have the same issue, um, but there's a little bit different, you know, um, the most important for, uh, uh, production plant is to keep the production up and running. And therefore, let's say they normally close down their production just 1 or 2 weeks per year, which is, uh, uh, over Christmas and New Year's Eve. And then they need to solve problems as quick as possible, change. Um, um, products as quickly as possible. So for them, FTT is a fault detection technosis, is really important. You need to identify already in advance when something breaks. And then it is two weeks, solve as much as possible and having this really good, uh, uh, digital twin combining the operation data with the beam, it helps them solve more problems in less time, so you can open up the production again quicker and make more money. Yeah. And I can imagine also enabling that prioritization to know of the 10 things that need to be done today or the 100 things that need to be done in this two week shutdown, what needs to be done first, where are these spaces which are most critical but also the most difficult to access, etc. etc. so that you can prioritize not just with, you know, what happened first, but start to work more, more actively. And more considered in the way that you go about your daily operation. Exactly, yeah, I agree, yeah. OK, perfect. Thank you for that. The second one that you mentioned when we talked about a general topic or an overview of space, where digital twin can add value is energy efficiency. Can you give us an example around how digital twin can be used to really attack this this sustainability topic? Yeah, at the end, let's say, we are all, we all need, I think, should, uh, work towards this goals being energy efficient, to cut down the CO2 level that we all work together to achieve our Green Deal. It's a really important topic. It's a, yeah, where can the digital twin help to achieve this. It's, today, often, let's say the energy usage is not, uh, perfect in the buildings, although buildings, uh, produce 37% of all the CO2 level, uh, uh, output. And let's say what's really interesting is that when we combine the data, what we give, gets from the billmentation concerning a home automation of primary energy consumption. Um, and we overlap this with a model. It's a creating that the digital twin, we can then, um, create cool dashboards showing up really quickly. The energy consumption, for example, what's the temperature in this, in this room, what the, what's the, the CO2 level in this room to really give, uh, the operators a quick overview. What's the current state of the building. And let's say with these dashboards, then the FM guys can take quicker decision and let's say if they see one room is overheated. And this room is overheated for a longer time, then you can deep dive, especially just in this room. And then there's also a, a feature we call gap analysis, where then can really just for this room, analyze what's the The, uh, the, the shoot value and the current value, and if this is not matching over a long time, then let's say, we should adapt the, the configuration of the automation systems, or in general, we, it is a trigger for us to do something because let's say the bill is not configured perfectly. So you're leveraging the understanding of the space itself, so not just, not just the floor area, but the type of space, you know, the 3D representation of that space, and use that to derive the best case scenario and then making that gap analysis like you described to really identify the areas where not only are you You may be a degree off a set point or 2 degrees away from where you expect to be, but also compared to the total expectation within that space and knowing a little bit about the energy requirements to to make the changes that have been completed by the system to help you make that decision again and see where do we have to make changes, where do we need to even operate in a slightly different manner. Uh, so that you can reach those goals. Yeah, exactly. Yeah, it's about on the one hand we get data from the management station, the operation data, what's the consumption, what's the, uh, temperature, what's the CO2 level, and then we take the beam models. But there we, on the one hand, also get really important information concerning what's the square meters, what's the cubic meters, but also what's, what is the, the typical usage of the room? Is it an office area? Is it the meeting room? Is it an open office? Is it a bathroom, you know, depending, let's say, what's the, for what you use the room, yeah, the, the The, the, the set points should also be different from an automation perspective and we need to bring these two words together to optimize it continuously and then next is the beam model, a 3D representation, or 2D representation or whatever is a really good tool for us to make good dashboards because, you know, just uh Excel list or something like this is quite complicated to understand, but having a cool dashboard showing these rooms are red. Or the red ones are the bad ones, the green ones are the good ones, yeah, is, uh, much easier to understand for people. And it's if, if you see these 3, these three rooms are redder, then you have to do something. Yeah, absolutely, and I think that's, I really like the last point that you mentioned because it's something that we shouldn't underestimate. In your, in your opinion, how important is it just this ability to bring information together and be able to make it more easily understood and easy to digest for a user? How much of a benefit the building twin be when we use it to bring this this kind of Static data and dynamic data together and just make it easy to understand and easy to absorb. Yeah, I think it's really crucial because, you know, uh, today. Um, probably a lot of errors in buildings, so let's say, our buildings are not really optimized, but the thing is that, you know, people just don't know it, yeah. And if you just don't know it, you know, you cannot optimize it. And, um, um, combining these two worlds, making a better visualization, then from the visualization to drive a dashboard and give the people really, let's say, not just the next step after this dashboard is give the people really in a trigger or notification or a hint what they should do, then it's much easier to, to solve the problems because, you know, days like this. The FM guys need to really drill down and on their own identify, look up what could be the problem, etc. etc. and it's really time consuming, yeah. And now let's say we take the data, combine it, and now make dashboards, and then next, after, after the dashboards also give direct hints, hey, this could be the problem. Um, um, you could, you can solve more problems in less time. Or identify problems and solve problems which you have not seen before because, you know, combining this big amount of data, you know, buildings have someone in sensors, it's just complex and I think it's not, it's in general probably not possible because it would take too much time. Yeah, I understand, and I think that's, that's one of the other really important points to mention is that not everyone can be an expert in every system. And as buildings become, you know, more heavily automated, we have more operational systems that sit within them, and they all have, you know, hundreds and dozens of different sensors collecting information. The ability for us to use that information relies on us to understand it and make decisions from it. So any improvements we can make to to simplify the visualization, to bring understanding quicker, to recognize a difference or a gap or a fault more easily means that that daily operation is not just easier, but it's also faster and more effective. Exactly there, you know, you, you pointed out a really important thing here. Um, you know, having these 3D visualizations, um, It is much easier to understand. But we also identify from customers to say that this, this 2D view schematic and 2D floor plan fuse Yeah. This is really complicated to understand. And you know, the problem what we have, still, still have is let's say you have a building and then you probably have somebody who is already working for this hospital since the last 30 years, yeah. Of course, he understands the bill perfectly. But you know, a new young guy which comes in, he has a really, it's a really hard cookie for him to understand the building, you know, just after 2 years, yeah, or 3 years, he understands it. And we got now the, the, the feedback from our customers that they said, yeah, having this 3D model like a computer game. Helps them a lot in onboarding the know-how, because, you know, it's like a game, and the young guys, let's say the people already love to play video games and they somehow expect it also in the, in the work area, but on the other hand, yeah, it's also helping them really quickly, like in a game, having fun, going through the building and learning game wise, how the building works. Yeah, right, like that it's a term used probably a little bit too much, but gamification, just, just at least bringing, making it easier, making it more enjoyable, and maybe making it more interesting using the, you know, the latest technology to also help something which is, is part of their daily operation, a little bit more enjoyable, a little bit easier to understand. Perfect. At the start we mentioned 3 different types or 3 different areas of value from an operation digital twin. The last one you mentioned was productivity. So how using this kind of technology, having a really detailed 3D model that's integrated with the live data can also help the users of the building. And those within the spaces going about their daily business, improve their productivity. Can you give us an example of a use case in this space? Yeah, also the, um, um, increasing the productivity is a really important topic, for example, at hospitals. Imagine, uh, hospitals are opened. So if you build a hospital, it will be open in the next 50 to 70 years. 24 hours, 7 days a week, 365 days. And, you know, the main goal of a hospital is to heal patients. And therefore, um, um, it's really, uh, let's say today, nurses and, and doctors sometimes have the problems that, let's say their productivity is not perfect because, you know, they have some small issues, uh, like, for example, Finding objects, let's say like medical equipment, uh, X-ray scanner, um, uh, uh, um, which you can, let's say, take, uh, around the building, or let's say, where's the next more bed, or let's say, where's the next college? And I'd say to, to solve these problems, a digital twin, we have focus use case, for example, on asset tracking is a huge benefit for them, yeah, because let's say, They also, what you need to enable this use case of asset tracking, you need on the one hand, uh, a representation of the building here, mainly, 2D. You probably don't need 3D, but it's really important that this 2D is derived from a 3D model that, you know, also these other use cases like technical operations and energy efficiency all have the same representation. But for the stakeholders of the staff of the hospital staff, there, you need a, a 2D representation is enough because, you know, it must be easy for them. But what they need is on the one hand, is 2D representation, but then also this view where they see, where is the next equipment, where do I find a mobile scanner, where do I find a mobile bed? Where is the next doctor? Where is the next nurse? So that they can be more efficient because today, um, a lot of time gets wasted for this, yeah. And on the other hand, of course, this is, this can get used by the by the hospital staff, but on the other hand, also the patients can then use this digital twin and also the visitors because, you know, You know, were you ever in a hospital which was quite big and you didn't find the, the perfect way to, uh, uh, uh, visit somebody. So I experienced this already quite often, yeah. Yeah, and that's an interesting, you know, connection because you mentioned all of these different use cases, whether it's technical operations, whether it's energy efficiency, whether it's productivity, should use the same representation because that representation should be as close to the real thing as possible. But for this particular use case, just putting the simplest version. …

Full transcript (WebVTT)