What 30+ Years in Maintenance Taught Me About People and Machines - with Tim Hunt

Trend Detection Podcast ·

Show notes

Welcome to the Trend Detection podcast, brought to you by Senseye Predictive Maintenance – which gives you visibility and insights into all your assets, from single machines to full plants to help you reduce downtime, increase knowledge sharing and accelerate digital transformation across your organization.

You can find out more about how Senseye Predictive Maintenance can reduce unplanned downtime and contribute towards improved sustainability within your manufacturing plants, by visiting: www.siemens.com/senseye-predictive-maintenance

Transcript

And that's where the PDM come in at the learning the predictive maintenance and how to use those tools and technologies and, and uh then I just created a passion for it because every day I walk in the door I was trying to make a difference and, and, uh, and I was able to with these technologies. I was able to predict failures before they ever happen. Welcome to the trend detection podcast, powered by Siemens, and now your host, Liz McGinn. Hi everyone, it's Liz McGinn here on Trend Deduction podcast, and I'm joined by Tim Hunt. Tim, do you want to give a little bit of your introduction? Yeah, sure. Uh, Tim Hunt, live in, uh, southwestern Kentucky, uh, been in the maintenance field for over 30 years now. I started out as a welder fabricate fabricator, moved into being a millwright, got my certification, millwright, then I moved into the PDM role. And, uh, so I, I've had a full career and I retired from Logan Aluminum. I worked there for 25 years and, uh, after I retired, I played a whole lot of golf and I'm like, you know what, I, I'm ready to get back in the game. So, uh, stumbled across Sensei, uh, which is purchase was going through the purchase at the time of Siemens buying it and, uh, and they was talking predictive maintenance and I got, and we were talking the same thing and, um. Uh, right before I left Logan, I was working with AI and I really enjoyed AI so I'm like this is just a good fit. So, uh, I've been with Siemens now for, uh, since I slash for a little over probably 2.5 years now, but, uh, so that's kind of my background. Awesome, we're all super glad to have you here. Um, so you start, you start, you. Sorry, you said you started as a welder. Um, what did that kind of look like day to day? Day to day welding, fabricating, building things, uh, then I would go out on, uh, I would done, done a lot of traveling back in those days, uh, and I mean I was fresh out of school. I never left the county. I mean I'd never seen anything and so I got to see the world at, at a young age, and, uh, uh, so that, that was exciting. That's where I was going into factories and started doing the mill right, rebuilding, repairs, stuff like that, and then, uh. Uh, just evolved from there. I realized real early that I did not wanna spend my life being a welder because most of them old guys was blind and I'm like, you know, I, I need to do something different here. So yeah, so what's mill Ron? Male right is, uh, they, uh. It, they, they, most of your mill rights will actually build a, a mill. They can, you can go in and make repairs. You can change out, rebuild gearboxes, change out motors. I mean, they, they're the ones that's, uh, that typically referred to as mechanical technicians, uh, uh, in a factory, in a plant. So you typically, you got electricians and you got mechanics. Most of your mechanics have a mill right background of they can, you, you tell them, go change the cylinder, they can change the cylinder. You tell them to. To change out a roll or bearings, like they are trained in doing that. So that that's what a mill ride is. OK, so basically fix everything but the electricity. That's it. That's it. Leave that to electricians. Yeah, I mean, it's not safe to be messing with electricity if you're not fixing it. That's right. That's right. Yeah, I grew up, uh, with an electrician, so I have a healthy fear of getting electrocuted. Very good. Yeah, so, what first brought you into kind of the maintenance? You mentioned, um, you know, you didn't want to be a welder, but what led you into kind of going into this maintenance? Maintenance, I mean, it, it just kinda progressed there from the welding fabricating just simply because it, it paid very good. I mean, in our region here, uh, in Kentucky, I mean maintenance, uh, personnel, you know, they got the premium salaries at the factories and, and so I was able to raise my family. I mean, uh, it fed my family. My wife was able to stay at home, be a stay, stay at home mom, so I mean it was a great living for me. Uh, I, I, I enjoyed the work, uh, so that's kind of. What got me in it and kept me in it, I guess you could say up to that point, up to this point, I guess. Yeah, what was your favorite parts of working in maintenance? Uh, after I got into the PDM role, that, that, I got burnt out of rebuilding gearboxes and changing this and fixing that. I got burnt out on that. I was ready for something else. And then, uh, the PDM role, I was in the finishing department and it was a rotating position and I put in for it and got it. And once and I had a, I had really good bosses and, and they would send me to training, allow me to get all the training I wanted, and I was able to grow and make a difference and that's where the PDM come in at the learning the predictive maintenance and how to use those tools and technologies and, and, uh, then I just created a passion for it because every day I walk in the door I was trying to make a difference and, and, uh, and I was able to with these technologies. I was able to predict failures before they ever happened. You know, I'd tell them, hey, on this line you got 60 days to change out this motor. uh, on this other line you got 30 days to change it out. You've got, you know, it depends on the speeds and all, but, uh, I was able to make a difference. So that's why, that's what got me and that's where my passion come from, uh, got built and just fired off from there. Yeah, what did PDM look like when you started? Oh, boy. It, it was, uh, you would walk up to the machine and put a screwdriver to your ear and you would listen to the machine. I think I hear something in there. I mean, it was, I mean that, uh, motor alignments, they, they would use a straight edge or a credit card to line up motors and. And and uh the motors would last half of a lifetime, uh, compared to what they should. Then, then we were starting to get technologies in there, uh, some good vibration equipment, some, uh, laser alignment equipment. Now we're aligning the motors. Guess what? We're getting 7 years out of a motor now to where we're just getting 3. You know, so we, that's, that's how it started was so primitive 30 some years ago to, to the advancement of it to where it's at today. It was, we went from reactive maintenance to now we're at prescriptive maintenance. We're able to, the technology, AI technology, especially the senseIi, is able to tell you, hey, go clean your fan blade. It's out of vibration because of this. So, I mean, it's, I, I've seen this thing evolve throughout 30 some years. It, it's just been very exciting to see. That's awesome. Do you have some good? I bet I'm sure you have a ton of great stories. What's, um, some of the most memorable, um, moments that you've had within your maintenance journey? Just being able to make the predictions and consistently over and over to be able to tell because early on when I went into the role, I made a lot of mistakes, uh, you know, as I was learning vibration. Vibration is probably the hardest one to learn. Uh, once I started learning it and was able to, I would go into the engineer's office, say, hey, you've got a bearing, it's fixing to fail. You better change it out. You got 60 days to do it in. Uh, what I would do is when they would pull that bearing, they would give it to me and I'd take it and split it, clean it up, take it back to their office, and I could show them the spa that was in the outer race. Uh, it was exactly what I predicted and then they, they would believe me after that. And so just to be able to make those calls over and over and over again. And then, then at that time, the department started noticing, hey, we're not having to change out roles every weekend. We're not, uh, during the middle of the night. Something's taking place, something's changing here. Yeah. And, uh, so that was actually, it was a rotating position I was in. It was 3 years and they said, hey, let's take him to 5 years. Let's let him do the, let's leave him in there. So from the 3 year to 5 year I mean I was able to, you know, with the technology is able to catch just about everything. I mean it was just so it was so cool the way uh you know I was able to grow and and allowed to grow at the end of that 5 years, uh, my boss was able to, uh, meet with plant managers and all, and they, uh, they decided to create a position and I was able, one of the fortunate ones to be able to get that position to where I was able to to to do this with the whole plant. And here I was able to teach, uh, I was, I, I taught a lot of classes. I'll put that's when, uh, online vibration systems. I started putting them in all over the plant and, and, and every time we put one in it would catch something and they'd say, oh, it's wonderful, put it in over here and put it in over here. So I spent many years there. I was in that, uh, the plant reliability specialist role for the last 10 years I was at Logan. Uh, putting in, uh, online vibration systems and, and teaching predictive maintenance classes and, and, uh, because each department had PDM coordinators and they, they, they were on a rotating position so I was able to teach them and that so I at some point somebody was always rolling in and rolling out and, uh, so. That's, that's just kind of it. That's awesome. So, were you using like Excel sheets? Were you just checking numbers and like, doing, you know, kind of things? I know that now it's pretty automated, I guess is how I would describe it. I mean, it does still have people, you know, in there, but when you started, was it mostly like writing things down, going to check machines, checking numbers, and is that how you kind of calculated how to predict, or um was there other technologies that you kind of started with? Well, Like when I got into the vibration, it had its own. I mean you could, you would just learn failure modes, what they look like and every time I would find a bearing failure I'd print it off. I would write notes on it and, and I actually have, uh, at the end of the career when I was teaching more I was using those sheets to say this is what an outer race defect looks like this is, this is what this looks like and that misalignment and all, uh. So I, I was, I had good technology, I guess you could say that was able to help guide me, uh, along the along that way. That's awesome. I guess, speaking of technology, what are, um, I know we talked about it a little bit from kind of the primitive, uh, maintenance to, you know, what predictive maintenance is today. Um, what are some of the biggest changes that you've noticed? The biggest changes, ah. Probably, uh. When like, like at Logan and the, the folks I'm working with now, whenever a, a, a company starts implementing predictive maintenance, that, that, that whole culture shifts. Now they're thinking different, they're talking different, they're able to schedule their, their, uh, the, the equipment to be changed out. I mean they, something's going bad, something's wearing, something's loose, they're able to fix things on a scheduled downtime. Uh, where they can get the manpower in there, get the, uh, uh, get the pieces, the parts, the maintenance technicians get their lunches, they get their breaks, everybody's working in a safer environment. Uh, it's just unreal to, to see when, when a culture implements predictive maintenance because it makes so much difference. I mean, it, it, it's, it will sell itself. That's, that's the thing about it. It, it's so good. Yeah, that's nice that it's not, um, always fighting the fires. You gotta, I'll tell you. Still enjoy what you're doing. Yeah. Because that's what life was 30-some years ago when I got into maintenance. You was fighting fires. You would sit and wait for something to break. When it broke, you would flog it and you, and it's all hands on deck and, uh, everything's a hammer, everything's a pry bar. I mean, it's just, and, and they rewarded us. They'd give us pizza for doing so, for fixing it so fast and so unsafe. And I mean, your arms and hands was always cut up because of the way, there was nothing safe about the way we worked back then. Uh, to where, hey, there's a better way. You don't have to work like this. So you can schedule this on an outage and to where people have enough time to make these repairs in a safe manner. So if a company's really concerned about safety, this is where it's at. This will change your safety numbers. Yeah, safety is super important. I know, uh, injuries, especially in, you know, factories can, can happen quickly, and it's a lot of times maintenance because they're taking apart and going around the safety things that are kind of set up there to kind of get in there. So, yeah. That's awesome. Um, what has your definition of what good maintenance looks like, uh, Have has changed over your career. Definitely going from uh reactive to that prescriptive like what we was talking about earlier. Now we're data-driven decision making we're letting data drive us to, uh, and I've seen it we've got customers that are doing it with, uh, can monitor you can monitor differential pressure on, on filters and and know when you need to change out a filter instead of doing it on a time basis you can do it when the when. The data says OK now it's time to change out your filter which could be giving you a lot more life which could save you money, save you manpower from having to to prematurely changing these out so I mean it just letting the technology uh. Uh, lead you to make these decisions. So that's, that's exciting compared to thirty-some years ago when it was all reactive, when everything was time-based. Yeah, did you, I guess, implementing new technology is always difficult, and I find, um, I've worked only in marketing, but for a manufacturing firm, and I know that it's kind of hard to implement some new technology. So how did that, how did that go for you? Obviously you embraced it, but how does that look like for your colleagues or um other people, you know. The, the thermo, like the thermal imaging guns, the ultrasound, the the vibration, those are easier to get people to embrace than the AI because AI people tend to, well, that's a black box. I'm scared of it. I don't understand it. To wear a thermal gun, you can point it up there and, you know, the red part is hot and, oh, OK, I get that. Uh, so those were easy to teach and it was easy to get folks to embrace. The AI has been more of a struggle. Uh, the old school folks, uh, have a harder time with it because it's, I just don't understand it. I don't know what's, but the younger folks, they, they tend to make, uh, grab onto it a little bit quicker because they're used to working with computers more and they're more that type of individuals. So they, yeah, that, that's still, I still run into those challenges working with customers. Yeah, I can completely understand that. I can't. My mom embraced AI. She works in marketing though, and my dad's an electrician. He's like, I, I don't know what it does. Exactly right. Yeah, completely understandable. I guess, how are you, um, I mean, you've obviously trained different, uh, generations of, uh, maintenance people. What kind of advice, um, are you giving them and what do they need most when entering kind of the workforce? They need to know the why, the why behind what they're doing. You know, if they can understand why they're changing out a bearing and the importance of changing it outright, then they're more likely to do it the correct way, uh. Early in, early in my career we was taught to grab a hammer and you just beat the bearing on and, and get it going as fast as you could. We destroyed more bearings in the early days and, uh, it was unreal. We killed our own bearings before it ever got started good. Uh, by beating on them you create a false nailing in them that you, you, it's a where you starting to get a spa in that outer race. To where the new generation, if they know the why, OK, now they'll take time to go and, and put that bearing on a bearing heater, heat it up, slide it on, let it cool down properly. Guess what? You're gonna get full life out of that bearing, uh, you know, if it's greased and old properly, but you know it's, it's just if they can get right, if you can just teach them that part of it. Uh, then they, they'll, they'll embrace it because now they'll know why they have to do that, take these extra steps. So that, that's one of my big things is the why behind things. Yeah, it makes a lot of sense. I guess I didn't really realize how to put, I'd never know. I don't put bearings on, obviously. Uh, so it's interesting to know that there's a, you know, obviously a correct way, but a lot of people don't necessarily do it the correct way cause it's not the easiest way, so it's nice to teach the background of it. Yeah, I try to get to it. Awesome. Um, How do you see, so we've talked a lot about AI. How do you see that influencing, um, kind of the workforce and what it looks like in the future? In the, um, I think it's going to become more powerful and more powerful for, because what I get to see day in and day out. Companies that are using this AI platform like since I. They're able to, uh, you get a 3D version of your machine. Instead of just getting a vibration of it, instead I guess getting a thermal picture of it or whatever. Now you're getting to look at the vibration, the pressure, flows, temperature, the alloy. I mean, you're getting to all this information and able to overlay it. Now you've got a picture of your machine that you've never had before. Now you can make decisions that you've never been able to make before. I mean. Typically we see something vibrating. OK, we go to the highest vibration part. Let's change out a piece of equipment out. Well, maybe it's not that. Maybe it's a clogged filter that's putting back pressure and all you gotta do is, is like, uh, in our system we can have the, the differential pressure and vibration side by side and say, wait a minute, that filter stopped up. There's nothing wrong with the motor and pump. It's the, it's the filter, so. That's using the technology and I thought that and I I see companies grow by doing that. I mean that's, I think that's gonna be the wave of the future, yeah, so just using it as another tool to help diagnose it versus using a screwdriver and holding up to your ear. That's it. That's it. That's the difference is you, you, you're able to make better decisions again, data-driven decision making. Yeah, do you still think that gut instinct still plays a role in there? It is, it is, uh, early on in my career, whenever our vibrations spike, uh, uh, say take for instance a good example would be a fan. Say a fan blades starting to get dirty and it's starting to get out of balance. Early on, I'd see a step change and I'd run out there and I'd lay my hand on it and I'd listen to it and I'd do all. Then I, as I learned the failure modes of what an out of balance fan looks like, at the end of my career, I didn't have to go out there no more because I, OK, I've seen this before and this is, you know, I know this is a dirty fan blade. Wash your fan blade and you'll be in it, and it'll drop back down. But if you, if you're in a place to where you can walk out there, definitely. I trust the senses, to hear, to see, to smell, touch. Most of the time around the equipment, you know, you got cat 5 garden around everything now, so you can't touch nothing, but. Uh, but you can hear it though, so. Yeah, it's a good thing if, if you can. That makes sense that you can't, I mean, use as many senses because of safety, not like, obviously it's not a bad thing at all. Obviously we want people to be safe, but it's interesting to understand that the AI kind of steps in where people are no longer able to do that for safety reasons. Right, yeah. Nice. Um, so obviously you retired, played golf, and then came back to Sunsai. …

Full transcript (WebVTT)